All guides

Equipment Financing Rates: Compare Payments and Total Cost

Compare equipment quotes beyond the advertised rate. Include fees, advance payments, buyouts and repayment dates to understand the full obligation.

By · Published · Updated

Sources, examples and editorial standards

In this guide

A quoted equipment financing rate is useful only when you know what it applies to. An annual interest rate, a lease payment factor and a total finance charge describe different things. Two proposals can show the same monthly payment while requiring different deposits, fees or final purchase payments.

Before asking which rate is better, ask each provider for a complete payment schedule. You need the amount actually financed, the money due at signing, the date and amount of every payment, and the amount needed to own the equipment at the end. Those figures let you compare the cost of obtaining and using the same asset.

Why there is no single equipment financing rate

A business’s proposal reflects its circumstances and the proposed transaction. The amount, repayment period, equipment condition and security arrangements all belong in the discussion. A publicly advertised starting rate may describe an offer that does not fit your asset or credit application.

Ask whether the quoted rate is indicative or approved, what assumptions it relies on and when it expires. A preliminary quote based on a new machine from a dealer may need to change if you buy an older unit from a private seller. Give providers the same transaction details so you are comparing offers for the purchase you intend to make.

This guide does not publish a purported average market rate. The percentages below are hypothetical calculation inputs, chosen to show how different terms affect cost. They are not statements about rates currently available in either country.

Start with a standard amortizing loan

For a fully amortizing loan, each scheduled payment includes interest and a repayment of principal. The balance reaches zero after the final payment if you pay on schedule and no other charges are added. A fixed rate keeps the interest-rate assumption unchanged; it does not make taxes, insurance or maintenance costs fixed.

The following examples finance $100,000 over 60 months. Payments fall at the end of each month. Interest uses an annual nominal rate divided by 12, with no fees, deposit, balloon or missed payments. Dollar figures can represent one currency throughout; they do not compare Canadian and U.S. purchasing power.

Illustrative annual rate Monthly payment Total payments Total interest
7% $1,980 $118,807 $18,807
9% $2,076 $124,550 $24,550
12% $2,224 $133,467 $33,467

Payments are rounded to the nearest dollar for readability. Total payments use the unrounded calculation, so multiplying a displayed payment by 60 may give a slightly different number.

At these assumptions, moving from 9% to 12% adds about $149 a month and $8,917 over the term. That is a useful negotiating comparison when the other terms match. It stops being a complete comparison if one offer also charges an upfront fee or leaves a balance at the end.

A longer term can cost more despite a lower payment

Keep the amount at $100,000 and the illustrative annual rate at 9%, then change only the term. The result shows why an affordable monthly payment and a low total borrowing cost are separate goals.

Term Approximate monthly payment Approximate total interest
36 months $3,180 $14,479
60 months $2,076 $24,550
84 months $1,609 $35,148

The longer term provides breathing room in the monthly budget, but keeps the debt outstanding longer. In this example, the 84-month option costs about $20,669 more in interest than the 36-month option. The shorter schedule may still be impractical if it leaves too little cash for ordinary business expenses.

Match the term to a realistic operating plan. If you expect to replace a machine in four years, ask what the balance and payoff cost will be then. Do not rely on an assumed resale price to cover the debt without considering a lower-value outcome. Used-equipment markets and the condition of your particular asset can both change.

Fees can change the order of the offers

Imagine two fictional 60-month loans for $100,000. Offer A uses an 8% annual nominal rate and charges a $4,000 fee paid at closing. Offer B uses 9% and has no fee. Both amortize fully, with equal month-end payments and no other charges.

Offer A requires about $2,028 a month. Its scheduled payments total approximately $121,658; adding the fee brings cash paid for financing to about $125,658. Offer B requires approximately $2,076 a month and total payments of $124,550. Under these assumptions, the lower-rate loan costs about $1,108 more over the full term.

This comparison uses total dollars, not a formal annual percentage rate calculation or a present-value analysis. The timing of the upfront fee also matters to a cash-constrained business. If a fee is financed instead, the principal and interest calculation change. Ask whether each fee is paid separately, deducted from proceeds or added to the balance.

Also check what the fee buys and whether it is refundable if funding does not happen. A vague description such as administration should prompt a request for the amount, payment date and cancellation terms in writing.

A balloon reduces payments by leaving debt unpaid

A balloon is a final balance due under the agreement. It can lower regular payments because those payments do not fully repay the amount financed. Your comparison needs a plan for the balloon as well as the monthly obligation.

For a simplified example, a $100,000 loan at 9% over 60 months with a $20,000 balloon has regular month-end payments of approximately $1,811. Total regular payments plus the balloon are approximately $128,640, compared with about $124,550 for the fully amortizing version. Both examples exclude fees and taxes.

The regular payment is lower by about $265, but the borrower must still produce $20,000 at the end. Refinancing that balance is a future credit decision, not something to assume will be available. Selling the asset may help, but the sale price could be lower than expected or the sale could take longer than planned.

For a lease, the end-of-term amount may be a purchase option with different legal consequences from a loan balloon. Ask what happens if you choose to return the equipment, keep it temporarily or miss a notice deadline. Compare the cash required for the outcome you actually want.

Fixed and variable rates need different questions

For a variable proposal, request the reference rate, the margin added to it, the reset schedule and any floor. Then ask how a change affects the payment or the remaining term. The words variable rate do not tell you all of those mechanics.

The Bank of Canada’s policy-rate page explains the policy benchmark and publishes decisions. That benchmark is not an equipment financing offer. Use the benchmark written into your own contract when modelling a change; do not substitute a central-bank number just because it appears in the news.

Ask the provider to show payments if the contractual reference rate rises by one and two percentage points. Those are stress-test scenarios, not predictions. Put the resulting payments into the months when your business normally has the least cash available.

For a fixed proposal, confirm when the rate becomes locked, how long the approval remains valid and whether a delivery delay could require a new quote. A fixed rate in a signed funded agreement and a provisional fixed-rate quotation are different stages of the transaction.

Understand what a payment factor means

A payment factor expresses a scheduled payment relative to the amount financed. If a proposal gives a monthly factor of 0.025 on $100,000, the indicated payment is $2,500. That figure alone says nothing about how many payments you owe, whether any are due in advance or whether a purchase payment follows.

A total repayment factor has a different meaning. A hypothetical factor of 1.20 on $100,000 indicates $120,000 of repayment before any separately charged amounts. It does not automatically mean a 20% annual interest rate. Repayment timing matters: paying $120,000 over one year and paying it over five years are different cash flows.

When a proposal uses a factor, ask for the full schedule and the contract’s cost disclosures. A qualified adviser can calculate an effective financing rate from the actual cash flows. Do not compare a factor directly with the annual interest rate in a conventional amortizing loan.

Early payoff can change the decision

If you expect to sell or refinance the equipment early, compare an exit scenario alongside the full-term total. Ask for a written illustration of the amount needed to settle after 12 months and after 24 months. Specify that payments have been made on time and ask which charges remain payable.

Some contracts may base settlement on more than the principal you expect to see outstanding. A payoff may include fees or other amounts defined by the agreement. Read the settlement provision and have the provider explain the calculation before you choose an offer on the assumption that early payment will save all future finance charges.

Check the administrative steps as well. Who provides the payout statement? How long is it valid? How will security be released after settlement? If a buyer is waiting to purchase your equipment, uncertainty around those steps can disrupt the sale even when you have enough money to repay.

Compare the same purchase price and cash contribution

Financing incentives can be bundled with an equipment price. Ask the seller for the cash price and the financed price using the same specification, attachments, warranty and delivery terms. A smaller rate on a higher purchase price can still cost more overall.

Keep the deposit identical when comparing monthly payments, or make the difference explicit. A $1,500 payment with a large cash contribution cannot be compared fairly with a $1,800 payment that requires much less money upfront. Include trade-in equity only after subtracting any debt that must be paid off on the old asset.

Taxes also need consistent treatment. Find out whether the quoted payment includes applicable taxes and whether tax is paid upfront or over the contract. Ask your accountant how recoverable tax affects cash timing. Do not deduct an assumed tax benefit from one proposal while leaving the other untouched.

What to send when asking for a sharper quote

Give each provider an identical request with the supplier quote, desired amount, proposed deposit, delivery timing and whether you want to own the asset at the end. Include the equipment’s age and condition if it is used. Ask for proposals on the same term and payment frequency.

Provide enough information to explain the business accurately. If cash flow is seasonal, show the pattern. If a one-time expense affected last year’s result, document it. Improving an application means clarifying the underlying facts, not removing inconvenient debts or overstating expected contracts.

A larger deposit can reduce the amount borrowed, but compare that benefit with the value of retaining cash for operations. Request both structures if you are unsure. The more aggressive deposit should not leave the business dependent on a perfect first month of production.

Government program rates require their own comparison

Program limits and permitted charges are specific to the program and loan type. The Canadian program FAQ describes interest-rate limits and a registration fee for Canada Small Business Financing Program loans. Read the current terms and obtain the lender’s actual proposal before comparing it with conventional financing.

In the United States, the 7(a) program overview describes fixed and variable repayment arrangements and directs borrowers to participating lenders. A government guarantee supports the lender under the program; the borrower still has to qualify and repay. Avoid treating the program name as evidence that a particular quote is the cheapest available.

A final review before signing

Check that the agreement matches the quote you chose. The legal borrower, supplier, equipment description, financed amount and payment schedule should all be correct. If the final document changes a fee or purchase option, ask for an explanation and repeat the comparison with the new numbers.

Keep a copy of the quote and the final schedule. Put notice dates and any end-of-term decision into a calendar the business will retain. A financing arrangement can run longer than the employee who first handled it stays in the role.

For a first estimate, use the payment calculator. For a real decision, use the provider’s written cash-flow schedule and your own project budget. If the proposal cannot be explained in terms of cash due, payments, ownership and exit cost, ask the provider to clarify it before committing.

Ready to compare financing?

Use the on-site tool to compare upfront cash, scheduled payments, fees and end-of-term costs from your written quotes.

Compare written quotes

Educational tool, not an application. See our publisher disclosure.

Put the research to work

Check the numbers and your next steps

Original worked illustration · not lender pricing

Compare the payment with total scheduled interest

For equipment financing rates, test the operating assumption that can change affordability before comparing payments.

Calculation: Fixed-rate monthly payments in arrears; 90,000 financed at an assumed 8% annual rate

Hypothetical inputs and calculated results. Use one consistent currency unless a currency pair is explicitly shown; figures are not market averages or financing offers.
Input or measureIllustration
36 months: payment / interest$2,820.27 / $11,529.82
60 months: payment / interest$1,824.88 / $19,492.53
72 months: payment / interest$1,577.99 / $23,615.40

Decision takeaway: The rate is invented, not a market quote. The model has no fees, balloon or advance payments and is not a lease payout or legal APR calculation.

Relevant next reads

Choose the next guide for your asset, application or contract question. Each link leads to a different part of the equipment decision.

Additional decision metrics and research links updated . Existing provider-source review dates remain separate.